Toshiba e-STUDIO 5540C Service Manual page 815

Check item
Drive unit, Rollers
Replace parts
4th drawer transport sensor
4th drawer transport clutch
4th drawer feed clutch
Feed/transport motor
PFC board
Rollers
[E3F0] Tandem LCF transport jam (Paper not reaching the tandem LCF transport sensor)
Classification
Paper transport jam
Check item
Tandem LCF transport sensor
Tandem LCF transport clutch
Tandem LCF feed clutch
Feed/transport motor
PFC board
Drive unit, Rollers
Replace parts
Tandem LCF transport sensor
Tandem LCF transport clutch
Tandem LCF feed clutch
Feed/transport motor
PFC board
Rollers
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
• Gear check
• Roller check
Paper fed from the Tandem LCF does not reach the tandem
LCF transport sensor.
• Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[B])
• Connector check
• Harness check
• Clutch check
(Perform the output check: 03-252)
• Connector check
• Harness check
• Clutch check
(Perform the output check: 03-250)
• Connector check
• Harness check
• Motor check
(Perform the output check: 03-122)
• Connector check
• Harness check
• Connector check (CN505, CN516)
• Board check
• Gear check
• Roller check
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
8 - 59
Measures
Remarks
Error item
Measures
Remarks
ERROR CODE and TROUBLESHOOTING
8