Bridge Unit Front Cover - Toshiba e-STUDIO 5540C Service Manual

(3) Take out the bridge unit.
Notes:
When installing the bridge unit, engage the
dent of the unit with the 4 bosses of the rail.

4.10.12 Bridge unit front cover

(1) Open the front cover and then pull out the
bridge unit.
(2) Open the bridge unit lower cover and then
remove 3 screws from the bridge unit front
cover.
(3) Open the bridge unit upper cover and then
take off the bridge unit front cover while
keeping the lever of the bridge unit lowered.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
Bridge unit lower cover
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 214
Bridge unit
Fig. 4-620
Fig. 4-621
Bridge unit upper cover
Bridge unit front cover
Fig. 4-622