Checking Areas Of The Chart And Their Descriptions - Toshiba e-STUDIO 5540C Service Manual

2. Checking areas of the chart and their descriptions

[ 9 ]
[ 2 ]
[ 3 ]
TOSHIBA COLOR CHART
No.TCC-1
[ 1 ]
[ 6 ]
[ 14 ]
[ 2 ]
[1] Grid patterns
[2] YMCK patches
[3] Resolution patterns
[4] Gradation pattern
[5] Color registration pattern
[6] Pictures
[7] Magnification lines
[8] Center lines
[9] Arrow
[10] Halftone band
[11] White text on the black
solid
[12] Text
[13] Thin lines
[14] Note area
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SETTING ADJUSTMENT
[ 1 ] [ 8 ]
[ 3 ]
[ 7 ]
[ 1 ]
Fig.6-22
: For adjusting margin (void) and scanner section
: For checking uniformity
: For checking resolution
: Gradation pattern of seven colors (Y, M, C, R, G, B and K)
Coverage: 10-100%
For adjusting the halftone reproduction and gray balance
: For checking color registration
: For checking color reproduction and moire
: For checking the magnification error of primary and secondary
scanning directions
: Center lines for A4/LT sizes
: A mark for placing the chart properly onto the original glass
(place it to the left rear corner of the original glass.)
: For checking uniformity
: For checking the reproduction of white text on black solid
: For checking reproduction of text
: For checking reproduction of the thin lines (line width: 100µm)
: For recording the date, conditions, etc.
[ 10 ]
[ 5 ]
[7]
[4]
[ 7 ]
[ 13 ]
[ 8 ]
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
6 - 30
[ 2 ]
[ 3 ]
[ 2 ]
[ 1 ]
[ 6 ]
[ 11 ]
[ 7 ]
[ 12 ]