Black Header Density Level Adjustment; Black Area Adjustment In Twin Color Copy Mode - Toshiba e-STUDIO 5540C Service Manual

6.2.15

Black header density level adjustment

The density level of headers in the black mode is adjusted.
Mode Code
Full Color/ 7811
ACS Color
7812
Full Color 7816
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment.
<Procedure>
The procedure is the same as that of  P. 6-33"6.2.2 Density adjustment".
6.2.16

Black area adjustment in twin color copy mode

Mode Code
Twin color mode 7641-0 High density
with selected
7641-1 Medium density
colors
7641-2 Low density
Twin color mode 7642-0 High density
(Black and red)
7642-1 Medium density
7642-2 Low density
<Procedure>
The procedure is the same as that of  P. 6-34"6.2.3 Color balance adjustment".
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SETTING ADJUSTMENT
Original mode
Text/Photo * The larger the value is, the darker the headers
become. However, the density level differs depending
Text
on the modes.
Custom mode
Acceptable values: 0 to 8 (Default: 0)
Text/Photo mode: 4
Text mode: 5
User custom setting
(in the Text/Photo or Map mode base): 4
User custom setting (in the Text mode base): 5
User custom setting
(in the Photo or Printed image mode base): 3
Item to be
adjusted
The larger the value is, the larger the area
recognized as black in the original becomes. The
smaller the value is, the larger the area recognized
as the color other than black becomes.
Acceptable values: 0 to 255 (Default: 128)
The larger the value is, the larger the black area
becomes. The smaller the value is, the larger the red
area becomes.
Acceptable values: 0 to 255 (Default: 128)
6 - 44
<Adjustment Mode (05)>
Remarks
<Adjustment Mode (05)>
Remarks
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved