Standby Side Empty Sensor; Standby Side Tray Detection Sensor - Toshiba e-STUDIO 5540C Service Manual

4.5.59 Standby side empty sensor (S109)
(1) Take off the tandem LCF feeding unit.
 P. 4-82"4.5.52 Tandem LCF feeding unit"
(2) Take off the rear fence.
 P. 4-85"4.5.56 Standby side tray paper
amount detection sensor (S106)"
(3) Remove 1 screw, and then take off the
sensor cover.
(4) Remove 2 screws, and then take off the
sensor bracket.
(5) Disconnect 1 connector and release 3
latches. Then take off the standby side
empty sensor.
4.5.60 Standby side tray detection sensor (S108)
(1) Take off the tandem LCF standby unit.
 P. 4-81"4.5.51 Tandem LCF standby unit"
(2) Disconnect 1 connector, remove 1 screw and
then take off the bracket.
(3) Release 3 latches and then take off the

standby side tray detection sensor.

© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Sensor cover
Fig. 4-260

Standby side empty sensor

Fig. 4-261
Standby side tray detection sensor
Fig. 4-262
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 89
Bracket
DISASSEMBLY and REPLACEMENT
4