Reverse Path Cover Switch - Toshiba e-STUDIO 5540C Service Manual

4.10.8 Reverse path cover switch (SW5)
(1) Take off the receiving tray.
 P. 4-3"4.1.8 Receiving tray"
(2) Remove 2 screws and then take off the
sensor bracket.
(3) Remove 2 screws and then take off the
sensor bracket and the sensor cover.
Notes:
When installing the sensor bracket, be
careful not to catch the harness with the
bracket.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Sensor bracket
Fig. 4-611
Sensor cover
Sensor bracket
Fig. 4-612
Fig. 4-613
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 211
DISASSEMBLY and REPLACEMENT
4