Bypass Feed Sensor; Bypass Paper Size Detection Sensor - Toshiba e-STUDIO 5540C Service Manual

4.5.12 Bypass feed sensor (S72)
(1) Take off the SFB lower unit.
 P. 4-52"4.5.11 Bypass separation roller"
(2) Disconnect 1 connector and release 3
latches. Then take off the bypass feed
sensor by pushing its actuator.
4.5.13 Bypass paper size detection sensor (S70)
(1) Take off the bypass feed tray.
 P. 4-45"4.5.1 Bypass feed tray"
(2) Remove 5 screws and take off the upper tray.
(3) Remove 1 screw and remove a plate spring.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT

Bypass feed sensor

Upper tray
Plate spring
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 54
Fig. 4-153
Fig. 4-154
Fig. 4-155