Removing The Controller Interface Board Support Bracket - Thermo Scientific TSQ 9000 Hardware Manual

Thermo Scientific
8. Remove the controller interface board and PC communication board from the
instrument.
Figure 357. Removing the Controller Interface Board Support Bracket
9. If you need to replace the support bracket, use a T10 Torxhead screwdriver to remove the
seven M3 screws securing the controller interface board to the support bracket.
10. Replace the bracket and reattach it to the controller interface board.
Replacing the Boards in the TSQ 9000 Instrument
Controller
Interface Board
Support Bracket
PC Communication Board
3
Advanced Troubleshooting
TSQ 9000 Hardware Manual 333