Disconnecting The Ethernet Cable From The Pc Communication Board - Thermo Scientific TSQ 9000 Hardware Manual

Thermo Scientific
5. Use a T20 Torxhead screwdriver to loosen the two screws holding the support bracket to
the bottom of the instrument.
Figure 392. Removing the Controller Interface Board Support Bracket
6. Disconnect the Ethernet cable from the PC communication board.
Figure 393. Disconnecting the Ethernet Cable from the PC Communication Board
Ethernet
Cable
Connector
Connectors
Replacing the Calibration Gas Components
Controller
Interface Board
Support Bracket
Controller
Interface
Board
3
Advanced Troubleshooting
PC Communication
Board
TSQ 9000 Hardware Manual 369