Thermo Scientific TSQ 9000 Hardware Manual page 229

Thermo Scientific
a. With your hand around the stainless steel barrel, twist the tool until the alignment
groove at the end of the barrel aligns with the left screw around the slot vacated by
the vacuum interlock knob.
Figure 187. Inserting the Ion Volume Tool
b. Twist and push the stainless steel barrel to the right until it clicks into place under the
screw at the top of the slot.
Figure 188. Twisting the Tool Into Place
3
Advanced Troubleshooting
Replacing Components of the Ion Source
TSQ 9000 Hardware Manual 201