Thermo Scientific
Figure 136. Replacing the Collision Cell and Quadrupole 3 in the Analyzer Tray
Q3 Quad
Assembly
Collision Cell
Assembly
16. Replace the analyzer tray into the instrument by following the instructions in
the Analyzer Tray in the TSQ 9000 Instrument"
17. Restart your system by following the instructions in
3
Advanced Troubleshooting
Replacing Components of the Analyzer
Q3 Exit Lens
Assembly
on
page
142.
"Restarting the System"
TSQ 9000 Hardware Manual
Screws
"Replacing
on
page
145.
163