Finding The Inputs And Screws On The Left Hand Sub Panel - Thermo Scientific TSQ 9000 Hardware Manual

3
Advanced Troubleshooting
Replacing the Covers of the TSQ 9000 Instrument
294 TSQ 9000 Hardware Manual
Figure 315. Finding the Inputs and Screws on the Left Hand Sub Panel
Optional
Mech
Pump
AC Input
Connector
Collision Gas
Intake
Accessory
Start
Screw
GC Start
4. Remove the three screws on the left hand sub panel.
5. Replace the left hand sub panel and tighten the three screws holding it in place.
6. Replace the inputs.
7. Replace the left hand front panel and tighten the four screws holding it in place.
8. Restart your system by following the instructions in
Screw
System Mech Pump
Data System Connector
Reagent Gas Connectors
Screw
"Restarting the System" on
Thermo Scientific
page 145.