Maintenance Supplies And Tools - Thermo Scientific TSQ 9000 Hardware Manual

Maintenance Supplies and Tools

Thermo Scientific
To perform routine maintenance on the TSQ 9000 instrument, you will need the supplies
and tools listed in the following table. The supplies in the VPI MS Toolkit or the MS Toolkit
are included in the toolkit shipped with your instrument.
Item
Cloth or paper, lint-free
Column measuring tool
Source exchange tool
Small source exchange tool
Forceps
Gas, clean and dry
Gloves, clean, lint-free
Protective eye wear
Torx® T10 screwdriver
Torx® T20 screwdriver
Torx® T30 screwdriver
Wrenches, open-ended, 1/4-in.,
5/16-in., 3/8 in., 7/16-in.
Note The tools in the MS Toolkit are shipped in a black plastic case with the instrument.
Each tool in the kit can be ordered separately or you can order an additional toolkit. See
the ISQ and TSQ GC-MS Spare Parts Guide for ordering information.
a
A TSQ 9000 System with a VPI ships with the VPI MS Toolkit.
IMPORTANT Many nitrile and latex gloves not certified for clean room use contain
silicone mold releasing agents that will contaminate the instrument. For this reason, clean
room gloves are strongly recommended. We recommend Cardinal Health CP100 Nitrile
Cleanroom Gloves. See the ISQ and TSQ GC-MS Spare Parts Guide for ordering
information
In addition to the MS Toolkit, you can also purchase a TSQ 9000 Screw Kit, which includes
extra screws, nuts, and standoffs. Refer to the ISQ and TSQ GC-MS Spare Parts Guide l for
ordering information.
1
Performing Routine Maintenance
Included in Included in
the VPI MS the MS
a
Toolkit Toolkit
✓ ✓
✓
✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
Maintenance Supplies and Tools
Not Included in
the MS Toolkit
✓
✓
✓
✓
TSQ 9000 Hardware Manual 3