Thermo Scientific TSQ 9000 Hardware Manual page 344

3
Advanced Troubleshooting
Replacing the Boards in the TSQ 9000 Instrument
316 TSQ 9000 Hardware Manual
7. Locating the RF Boards and Brackets
.
8. Use your fingers to pry the bracket of the board away from the chassis and toward the left
side of the instrument.
9. Lift the board out of the instrument.
10. Remove the large glass manifold cover.
11. Set the glass cover on a surface where it will not be scratched or contaminated. Protect the
glass and any other manifold components from dust accumulation. Wear cleanroom
gloves when touching the glass. See the ISQ and TSQ GC-MS Spare Parts Guide for
information about ordering cleanroom gloves.
Rear RF
Front RF
Board
Board
Brackets
Thermo Scientific