3
Advanced Troubleshooting
Replacing Components of the Ion Source
184
TSQ 9000 Hardware Manual
Figure 165. Replacing the Source-Repeller Thumbscrews
5. Remove the thumbscrew-repeller spacers from the thumbscrews.
Figure 166. Replacing the Thumbscrew-Repeller Spacers
6. Move the locking ring out of the way.
7. Remove and replace the insulating spacers.
Figure 167. Replacing the Insulating Spacers
8. Move the locking ring back into place.
Thumbscrew-Repeller
Spacers
Insulating Spacers
Source-Repeller
Thumbscrews
Thermo Scientific