Installation procedures
Commissioning, general
Figure 5-7
On the IMH-S 400 model loosen and remove the six (6) screws for the rear air baffle and for
model IMH-S 750 loosen and remove the six (6) screws for the top and bottom air baffles and
then remove the air baffle(s).
Commissioning, general
Installing the Shelf Support Brackets
1. Insert the shelf support bracket [3] into the perforations [1] of the support rail and tilt it
downwards.
2. Make sure that the two vertical elements [2] of the shelf support bracket butt against the
support rail.
Figure 5-8 Shelf Support Bracket Installation
5-6
Heratherm
Removing the rear air baffle IMH 400-S / 750-S
Thermo Scientific