Replacing The Rf Board/Rod Driver Board Kits - Thermo Scientific TSQ 9000 Hardware Manual

3
Advanced Troubleshooting
Replacing the Boards in the TSQ 9000 Instrument
312 TSQ 9000 Hardware Manual
.
5. Use your fingers to pry the bracket of the board away from the chassis and toward the left
side of the instrument.
6. Lift the RF board out of the instrument. The rod driver board is attached to it.
Figure 333. Replacing the RF Board/Rod Driver Board Kits
Rear RF
Front RF
Board
Board
Brackets
Thermo Scientific