Thermo Scientific TSQ 9000 Hardware Manual page 353

Thermo Scientific
Figure 346. Removing the Lens Driver Board
7. Use your fingers to pry the bracket of the board away from the chassis and toward the left
side of the instrument.
8. Remove the top manifold cover (glass) out of the top of the instrument and set it aside.
9. Open the front door of the TSQ 9000 instrument.
10. Use a T20 Torxhead screwdriver to remove the four screws around the manifold door.
Note Remove the screws completely so that they do not scratch the manifold when you
close the door.
3
Advanced Troubleshooting
Replacing the Boards in the TSQ 9000 Instrument
Lens Driver Board Screw
TSQ 9000 Hardware Manual 325