Lining Up The Column In The Column Measuring Tool; Positioning The Septum - Thermo Scientific TSQ 9000 Hardware Manual

Thermo Scientific
Figure 9.

Lining Up the Column in the Column Measuring Tool

Column Outlet
14. Place a septum with a notch cut into it behind the transfer line nut. The septum marks
the place on the column where it should exit the nut.
Figure 10. Positioning the Septum
Column
Measuring Tool
15. Pull the column back from the spring loaded transfer line nut. Do not move the septum
from its position on the column.
Figure 11. Pulling the Column Back from the Spring Loaded Transfer Line Nut
Spring Loaded
Transfer Line Nut
1
Performing Routine Maintenance
Spring Loaded Column
Transfer Line Nut
Column
Replacing a Column
Septum
Septum
TSQ 9000 Hardware Manual 15