Reattaching The Vent Valve Knob And O-Ring; Reattaching The Metal Block - Thermo Scientific TSQ 9000 Hardware Manual

Thermo Scientific
17. Flip door over and insert and tighten the vent valve knob and o-ring into the front
manifold plate.
Figure 285. Reattaching the Vent Valve Knob and O-Ring
Vent Valve
O-ring
Vent
Valve
Knob
18. Reattach the three screws and metal block to the front manifold plate.
Figure 286. Reattaching the Metal Block
Screws
3
Advanced Troubleshooting
Replacing Components of the Manifold
Note: Tube
not
attached
TSQ 9000 Hardware Manual 265