Sleep Mode; Copying/Printing Mode; Down Sequence; Enhanced Fixing Mode - Canon imageRUNNER 5065 series Service Manual

<Characteristics>
- The machine uses the appropriate target temperature for the fixing roller to suit the selected rate of power saving (in user mode).
- The machine uses the appropriate target temperature for the fixing roller to suit the selected rate of power saving (in user mode).
Rate of saving
-10% (default)
-25%
-50%

9.2.8 Sleep Mode

iR5065 / iR 5055 / iR5075 / / /
<Characteristics>
- The power to the fixing assembly is cut.
- When the sleep mode is disabled, the machine shifts to standby mode through the start-up mode effective at time of power-on (30-sec start-up, low-temperature
environment start-up, high-humidify start-up, recovery).

9.2.9 Copying/Printing Mode

iR5065 / iR 5055 / iR5075 / / /
<Characteristics>
- The target temperature used while copying/printing is under way is +2 deg C in relation to the temperature used for standby.
- If the environment temperature is lower than 17 deg C
[1] temperature of the fixing roller (deg C)
[2] control temperature during copying
- If the environment temperature is 17 deg C or higher
[1] temperature of the fixing roller (deg C)
[2] control temperature during copying

9.2.10 Down Sequence

iR5065 / iR 5055 / iR5075 / / /
The machine does not have a down sequence.

9.2.11 Enhanced Fixing Mode

iR5065 / iR 5055 / iR5075 / / /
To ensure good fixing, the machine changes the control temperature between start-up sequence and standby.
Standard temperature
170 deg C
160 deg C
140 deg C
STANDBY PRINT START
(deg c)
215
210
205
200
195
190
[1]
185
180
175
0
0 180 360
STANDBY PRINT START
(deg c)
215
210
205
200
195
190
[1]
185
180
175
0
0 60 120
T-9-5
Time length to standby
4 sec or less
6 sec or less
8 sec or less
STANDBY
[2]
540 720 900
F-9-12
STANDBY
[2]
180 240 300
F-9-13
1080
(sec)
360
(sec)
Chapter 9
0015-4594
0015-4596
0015-4597
0015-4598
9-7