Sensor; Removing The Delivery Sensor(Ps1); Removing The Disengaging Sensor (Ps16) - Canon Inner Finisher-H1 Service Manual

Sensor

Removing the Delivery
Sensor(PS1)
■ Preparation
1. Remove the machine from the host machine.
"Removing this Machine from the Host Machine" on
page 41
2. Remove the Front Cover
Cover Unit" on page 55
3. Remove the Rear Cover."Removing the Rear Cover"
on page 55
4. Remove the Delivery
Tray" on page 56
5. Remove the Upper Feed Guide
Upper Feed Guide Unit" on page 59
6. Remove the Tray Guide
Guide Cover" on page 57
7. Remove the Staple-free Staple
Staple-free Staple Unit" on page 65
8. Remove the Processing Tray
Processing Tray Unit" on page 60
■ Procedure
1. Remove the Delivery Sensor [1].
• 1 Connector [2]
1x
[2]
Unit."Removing the Front
Tray."Removing the Delivery
Unit."Removing the
Cover."Removing the Tray
Unit."Removing the
Unit."Removing the
[1]
4. Parts Replacement and Cleaning
Removing the Disengaging
Sensor (PS16)
■ Preparation
1. Remove this machine from the host machine.
"Removing this Machine from the Host Machine" on
page 41
2. Remove the Delivery
Tray" on page 56
■ Procedure
1. Remove the Disengaging Sensor Holder [1].
• 1 Screw [2]
1x
2. Remove the Disengaging Sensor [1].
• 1 Connector [2]
1x
71
Tray."Removing the Delivery
[2]
[1]
[1]
[2]