Manual Pickup Roller; Removing The Manual Pickup Roller; Manual Feed Tray Paper Sensor; Removing The Manual Tray Sensor - Canon iR1020 Series Service Manual

Chapter 7
1) Detach the rear cover and rear-left cover.
2) Remove the relay PCB, registration clutch, and pickup drive unit.
3) Remove the gear [1] and screw [2], and then remove the pickup solenoid
[3].
[2]
[1]

7.6.4 Manual Pickup Roller

7.6.4.1 Removing the Manual Pickup Roller

iR1020J / iR1024J / iR1020 / iR1024 / iR1024A / iR1024N / iR1024F /
iR1024i / iR1024iF
1) Detach the front cover and front-left cover.
2) Remove the screw [1], and then detach the roller cover [2].
3) While holding the manual separation pad [1], release the right hook [2]
and then slide the right bearing [3].
4) Remove the manual pickup roller [4].
[4]
[1]

7.6.5 Manual Feed Tray paper sensor

7.6.5.1 Removing the Manual Tray Sensor

iR1020J / iR1024J / iR1020 / iR1024 / iR1024A / iR1024N / iR1024F /
iR1024i / iR1024iF
7-8
[3]
F-7-11
[2]
[1]
F-7-12
[3]
[2]
F-7-13
1) Detach the left cover and rear-left cover.
2) Remove the relay PCB, registration clutch, and pickup drive unit.
3) Disconnect the connector [1], release the claw, and then remove the man-
ual tray sensor [2].

7.6.6 Manual Feed Pickup Solenoid

7.6.6.1 Removing the Manual Pickup Solenoid

iR1020J / iR1024J / iR1020 / iR1024 / iR1024A / iR1024N / iR1024F /
iR1024i / iR1024iF
1) Detach the left cover and rear-left cover.
2) Disconnect the connector [1], remove the screw [2], and then remove the
0013-1224 manual tray pickup solenoid [3].

7.6.7 Manual Separation Pad

7.6.7.1 Removing the Manual Separation Pad

iR1020J / iR1024J / iR1020 / iR1024 / iR1024A / iR1024N / iR1024F /
iR1024i / iR1024iF
1) Remove the manual pickup roller.
2) While holding the manual separation pad [1], release the claw [3] and slide
the left bearing [4] with attention paid to the sensor flag [2].
0013-1233
[1] [2]
F-7-14
[1] [3] [2]
F-7-15
[4]
[2] [3] [1]
F-7-16
0013-1232
0013-1234