Manual Separation Roller; Before Removing The Manual Feed Separation Pad; Removing The Manual Feed Separation Pad; Duplexing Feed Motor - Canon iR C1020 Series Service Manual

12) Remove the 4 screws [1]
13) Put the right side of the host machine downward to slide the bottom plate
[1] for about 30mm from the pickup drive unit [2].
14) Remove the pickup drive unit [1].
- 2 screws [2]
15) Remove the plate [1].
- 4 screws [2]
F-9-64
F-9-65
F-9-66
F-9-67
F-9-68
16) Remove the manual feed pickup solenoid [1].
- 1 screw [2]

9.5.8 Manual Separation Roller

9.5.8.1 Before Removing the Manual Feed Separation
Pad
1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]

9.5.8.2 Removing the Manual Feed Separation Pad

1) Remove the cassette.
2) Remove the manual feed separation pad [1].
- 1 screw [2]

9.5.9 Duplexing Feed Motor

9.5.9.1 Before Removing the Duplex Feed Motor

1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
2) Remove the rear cover unit.(page 11-11)Reference [Removing the Rear
Cover Unit]
3) Remove the ADF Unit + Reader Unit.(page 5-8)Reference [Removing
the ADF Unit + Reader Unit]
4) Remove the right cover.(page 11-11)Reference [Removing the Right
Cover]

9.5.9.2 Removing the Duplex Feed Motor

1) Remove the duplex feed motor [1].
- 1 connector [2]
- 2 screws [3]
Chapter 9
F-9-69
F-9-70
0018-9210
0018-9211
0019-6132
0019-6134
9-25