Removing The Manual Feed Separation Pad - Canon iR4570 Series Service Manual

F-8-345
8.8.18.6 Removing the Manual
Feed Separation pad
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Remove the holding plate [5].
2) Remove the separation pad [6].
F-8-346
8.8.19 Registration Clutch
8.8.19.1 Removing the Rear
Cover
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Remove the 13 screws [1] and then the other screw
[2]; then, detach the rear cover [3].
If the left cover (lower) has already been detached, the
screw [3] should also have been removed.
0007-6719
8.8.19.2 Removing the Main
Drive Assembly
iR3570 / iR4570 / iR3530
1) Disconnect the connector [1], and free the harness
[2] from the wire saddle.
0007-6720
2) Remove the 4 screws [1], and detach the main drive
assembly [2].
[1]
[3]
[1]
[1]
[1]
[1]
[1]
[1]
[2]
F-8-347
F-8-348
Chapter 8
[1]
[1]
[1]
[1]
[1]
[1]
0007-6733
8-131