4
Parts Replacement and Cleaning > Consumable Parts Requiring Periodic Replacement > Removing the Manual Feed Separation Pad
2) Release the claws, and then slide the bearing (front).
3) Remove the manual feed pickup roller.
x1
MEMO:
Reassemble the manual feed pickup roller as shown.
4
Parts Replacement and Cleaning > Consumable Parts Requiring Periodic Replacement > Removing the Manual Feed Separation Pad
Removing the Manual Feed Separation Pad
1) Remove the manual feed pickup roller.
4-39).
2) Slide the bearing (rear) backward.
Claw
F-4-88
3) Remove the separation pad with a flat-blade screwdriver.
F-4-89
("Removing the Manual Feed Pickup Roller"(page
)
x1
4-40
F-4-90
F-4-91
4-40