Parts Replacement Procedure; Main Controller Box; Before Removing The Main Controller Box; Removing The Main Controller Box - Canon imageRUNNER 5065 series Service Manual

4.7 Parts Replacement Procedure

4.7.1 Main Controller Box

4.7.1.1 Before Removing the Main Controller Box

iR5065 / iR 5055 / iR5075 / / /
1) Detach the rear cover (upper). (page 10-11)Reference[Removing the
Rear Cover (Upper)]
2) Detach the main controller
15)Reference[Removing the Main Controller Box Cover]
3) Detach the right cover (upper rear). (page 10-10)Reference[Removing
the Right Cover (Upper Rear)]

4.7.1.2 Removing the Main Controller Box

iR5065 / iR 5055 / iR5075 / / /
1) Disconnect the 7 connectors [4] of the video PCB [1].
- 3 Wire saddle [2] (to free the harness)
- 1 Reuse band [3]
[2]
2) Disconnect all the connectors of the main controller PCB, and detach the
main controller box [3].
- 5 Edge saddle [1] (to free the harness)
- 4 Screw [2]
[3] [2] [1]
[2]
box cover. (page
[3]
[4]
[1]
[4]
[4]
F-4-21
[2] [1]
[1]
[1]
F-4-22

4.7.2 Main Controller PCB

4.7.2.1 Before Removing the Main Controller PCB

iR5065 / iR 5055 / iR5075 / / /
1) Detach the rear cover (upper). (page 10-11)Reference[Removing the
Rear Cover (Upper)]
2) Detach the
0015-6362
15)Reference[Removing the Main Controller Box Cover]
3) Detach the right cover (upper rear). (page 10-10)Reference[Removing
the Right Cover (Upper Rear)]
10-

4.7.2.2 Removing the Main Controller PCB

iR5065 / iR 5055 / iR5075 / / /
1) Remove the 4 screws [1].
0015-4788
2) Detach the reader relay PCB [1] from the main controller PCB.
3) Detach the Video PCB unit [3].
- Screw [1] 2pc.
- Connector [2] 7pc.
main controller box cover.
[1]
[1]
F-4-23
[1]
F-4-24
Chapter 4
0015-6366
(page 10-
0015-4789
4-13