Parts Replacement Procedure; Main Controller Box; Removing The Rear Cover; Removing The System Connector Cover - Canon ImageRunner iR8500 Series Service Manual

Chapter 4

4.7 Parts Replacement Procedure

4.7.1 Main Controller Box

4.7.1.1 Removing the Rear Cover

iR105i/iR105+ / iR9070
1) Remove the 11 mounting screws [1], and detach the rear cover [2].
[1]
[1]

4.7.1.2 Removing the Rear Cover

iR85+
1) Remove the 11 mounting screws [1], and detach the rear cover [2].
[1]
[1]
4.7.1.3 Removing the Rear Cover
/ iR8070
1) Remove the rear upper cover (4 screws).
2) Remove the 10 mounting screws [1], and detach the rear cover [2].
4-26
0008-2726
[2]
F-4-29
0008-9357
[2]
F-4-30
0008-9684
[1]
[1]

4.7.1.4 Removing the System Connector Cover

iR105i/iR105+ / iR9070 / iR85+ / iR8070
1) Remove the 2 screws [1], and detach the system connector cover [2].
[1]

4.7.1.5 Removing the Main Controller Box

iR105i/iR105+ / iR9070 / iR85+ / iR8070
1) Disconnect the 6 connectors [1], and remove the 4 screws [2].
[1]
[1]
[2]
F-4-31
0008-2728
[2]
F-4-32
0008-2672
[1] [1] [1] [1]
F-4-33