Querying The Circuits Of A Timeslot Or A Range Of Timeslots; Configuring A Bsv Bri Interface; Bsv Interface - HP FlexNetwork MSR Series Configuration Manual

Step
3. Create a TS set, enable
digital LGS signaling and set
its start mode.
4. Quit digital LGS signaling
view.
5. Enter voice subscriber line
view.
6. Configure the dial delay.
7. Configure the maximum time
waiting for the subscriber to
dial the first digit.
8. Configure the maximum
interval between any two
dialed digits.
9. Configure the maximum time
that the calling party waits for
a ringback response.

Querying the circuits of a timeslot or a range of timeslots

Step
1. Enter system view.
2. Enter E1/T1 interface view.
3. Create a TS set for digital
LGS signaling and select a
start mode.
4. Enter digital signaling view.
5. Query the circuits of a
timeslot or a range of
timeslots.

Configuring a BSV BRI interface

BSV interface

The BRI S/T voice (BSV) interface supports transmission of voice and data, can receive, send,
compress, de-compress digital PCM voice traffic on ISDN BRI interfaces, and realizes VoIP function
through other WAN interfaces of the router.
Generally, a BSV interface is used to connect an ISDN digital telephone, and also can be used as a
trunk interface connecting to a PBX digital trunk. If it cooperates with an FXS or FXO interface, a
BSV interface can realize flexible route selection policies for voice calls.
Command
timeslot-set ts-set-number
timeslot-list timeslots-list signal
{ fxo-ground | fxs-ground |
fxo-loop | fxs-ground |
fxs-loop }
quit
subscriber-line:
ts-set-number:ts-set-number
delay start-dial value
timer first-dial seconds
timer dial-interval seconds
timer ring-back seconds
Command
system-view
controller { e1 | t1 } slot-number
timeslot-set ts-set-number timeslot-list
timeslots-list signal { fxo-ground | fxo-loop |
fxs-ground | fxs-loop }
cas ts-set-number
ts query timeslots timeslots-list
87
Remarks
Optional.
N/A
N/A
Optional.
1 second by default.
Optional.
10 seconds by default.
Optional.
10 seconds by default.
Optional.
60 seconds by default.
Remarks
N/A
N/A
N/A
N/A
Optional.