Mirroring-Group; Mirroring-Group Mirroring-Port (Interface View) - HP MSR1003-8S Command Reference Manual

Field
Type
Status
Mirroring port
Monitor port

mirroring-group

Use mirroring-group to create a mirroring group.
Use undo mirroring-group to delete mirroring groups.
Syntax
mirroring-group group-id local
undo mirroring-group { group-id | all | local }
Default
No mirroring group exists on a device.
Views
System view
Predefined user roles
network-admin
Parameters
group-id: Specifies a mirroring group by its number in the range of 1 to 6.
local: Specifies local mirroring groups.
all: Specifies all mirroring groups.
Examples
# Create local mirroring group 1.
<Sysname> system-view
[Sysname] mirroring-group 1 local

mirroring-group mirroring-port (interface view)

Use mirroring-group mirroring-port to configure a source port for a mirroring group.
Use undo mirroring-group mirroring-port to remove a source port from a mirroring group.
Syntax
mirroring-group group-id mirroring-port { both | inbound | outbound }
undo mirroring-group group-id mirroring-port
Description
Type of the mirroring group. This field displays Local for local mirroring
groups.
Status of the mirroring group:
•
Active—The mirroring group has taken effect.
•
Incomplete—The mirroring group configuration is not complete and does
not take effect.
Source port.
Destination port.
357