Display Interface Virtual-Ppp - HP VSR1000 Layer 2 - Wan Access Command Reference

Parameters
text: Specifies the interface description, a case-sensitive string of 1 to 80 characters.
Examples
# Set the description of Virtual-PPP 10 to virtual-interface.
<Sysname> system-view
[Sysname] interface virtual-ppp 10
[Sysname-Virtual-PPP10] description virtual-interface

display interface virtual-ppp

Use display interface virtual-ppp to display information about virtual PPP interfaces.
Syntax
display interface [ virtual-ppp ] [ brief [ down ] ]
display interface [ virtual-ppp [ interface-number ] ] [ brief [ description ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-number: Specifies an existing virtual PPP interface by its number in the range of 0 to 255.
brief: Displays brief interface information. If this keyword is not specified, this command displays
detailed interface information.
down: Displays information about the interfaces in physically down state and the causes. If this keyword
is not specified, this command displays information about the interfaces in all states.
description: Displays the entire interface description. If this keyword is not specified, this command
displays only the first 27 characters of a description.
Usage guidelines
If the virtual-ppp keyword is not specified, this command displays information about all interfaces.
If the virtual-ppp keyword is specified without any interface number specified, this command displays
information about all virtual PPP interfaces.
Examples
# Display detailed information about virtual PPP interface Virtual-PPP 10.
<Sysname> display interface virtual-ppp 10
Virtual-PPP10
Current state: Administratively DOWN
Line protocol state: DOWN
Description: Virtual-PPP10 Interface
Bandwidth: 0kbps
Maximum Transmit Unit: 1500
Hold timer: 10 seconds
9