Display Ipsec Tunnel - HP HSR6600 Command Reference Manual

ESN : disable
ESN scheme: NO
transform: esp-new
ESP protocol:
Integrity: md5-hmac-96
Encryption: des
IPsec transform-set name: tran2
encapsulation mode: transport
transform: esp-new
ESP protocol:
Integrity: md5-hmac-96
Encryption: des
Table 43 Command output
Field
IPsec transform-set name
encapsulation mode
transform
AH protocol
ESP protocol
Related commands
ipsec transform-set

display ipsec tunnel

Use display ipsec tunnel to display information about IPsec tunnels.
Syntax
display ipsec tunnel [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Name of the IPsec transform set.
Encapsulation mode used by the IPsec transform set, transport or tunnel.
Security protocols used by the IPsec transform set: AH, ESP, or both. If both
protocols are configured, IPsec uses ESP before AH.
Authentication algorithm used by AH.
Authentication algorithm and encryption algorithm used by ESP.
290