Display L2Tp Tunnel - HP VSR1000 Layer 2 - Wan Access Command Reference

Field
State

display l2tp tunnel

Use display l2tp tunnel to display information about L2TP tunnels.
Syntax
display l2tp tunnel [ statistics ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
statistics: Displays statistics for L2TP tunnels.
Examples
# Display statistics for L2TP tunnels.
<Sysname> display l2tp tunnel statistics
Total number of tunnels: 1
# Display information about L2TP tunnels.
<Sysname> display l2tp tunnel
LocalTID RemoteTID State
1 1
Table 6 Command output
Field
LocalTID
RemoteTID
State
Description
Session state:
•
Idle.
•
Wait-tunnel—Waits for the tunnel to be established.
•
Wait-reply—Waits for an Incoming-Call-Reply (ICRP) message
indicating the call is accepted.
•
Wait-connect—Waits for an Incoming-Call-Connected (ICCN)
message.
•
Established.
Sessions RemoteAddress
Established 1
Description
Local tunnel ID.
Remote tunnel ID.
Tunnel state:
•
Idle.
•
Wait-reply.
•
Wait-connect.
•
Established.
•
Stopping.
20.1.1.2
13
RemotePort RemoteName
1701 lns