Lldp Commands; Display Lldp Local-Information - HP 5900 series Command Reference Manual

LLDP commands

display lldp local-information

Use display lldp local-information to display the LLDP information to be sent, which will be contained in
the LLDP TLVs and sent to neighboring devices.
Syntax
display lldp local-information [ global | interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
global: Displays the global LLDP information to be sent.
interface interface-type interface-number: Displays the LLDP information to be sent out of the interface
specified by its type and number.
Usage guidelines
If no keyword or argument is specified, this command displays all LLDP information to be sent, including
the global LLDP information and the LLDP information about the LLDP-enabled ports in the up state.
Examples
# Display all LLDP information to be sent. (Suppose that DCBX is of Rev 1.00.)
<Sysname> display lldp local-information
Global LLDP local-information:
Chassis ID
System name
System description
System capabilities supported
System capabilities enabled
MED information:
Device class
MED inventory information of master board:
HardwareRev
FirmwareRev
SoftwareRev
SerialNum
: 00a0-fc00-5800
: HP
: HP Comware Platform Software, Software Version 7.1.034,
Alpha 2203
HP 5900AF-48XG-4QSFP+ Switch
2010-2012 Hewlett-Packard Development Company, L.P. All
rights reserved.
: Bridge, Router
: Bridge, Router
: Connectivity device
: Ver.A
: 118
: 7.1.034 Alpha 2203
: DPPMWWB123456
167