Tunnel Timer Hello - HP VSR1000 Layer 2 - Wan Access Command Reference

Default
No key is configured.
Views
L2TP group view
Predefined user roles
network-admin
Parameters
cipher: Sets a ciphertext key.
simple: Sets a plaintext key.
password: Specifies the key for tunnel authentication. This argument is case-sensitive.
it must be a ciphertext string of 1 to 53 characters. If simple is specified, it must be a string of 1 to 16
characters.
Usage guidelines
For this command to take effect, you must enable tunnel authentication by using the tunnel authentication
command.
For security purposes, all keys, including keys configured in plain text, are saved in cipher text.
Examples
# Set the key for tunnel authentication to a plaintext key yougotit.
<Sysname> system-view
[Sysname] l2tp-group 1 mode lac
[Sysname-l2tp1] tunnel password simple yougotit
Related commands
tunnel authentication

tunnel timer hello

Use tunnel timer hello to set the interval for sending Hello packets in a tunnel.
Use undo tunnel timer hello to restore the default.
Syntax
tunnel timer hello hello-interval
undo tunnel timer hello
Default
The interval is 60 seconds.
Views
L2TP group view
Predefined user roles
network-admin
24
cipher is specified,
If