Automatic Configuration Commands; Autodeploy Udisk Enable - HP MSR Series Command Reference Manual

Automatic configuration commands

autodeploy udisk enable

Use autodeploy udisk enable to enable USB-based automatic configuration.
Use undo autodeploy udisk enable to disable USB-based automatic configuration.
Syntax
autodeploy udisk enable
undo autodeploy udisk enable
Default
USB-based automatic configuration is enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The USB disk for automatic configuration can have multiple configuration files. A configuration file can
be named in the Device serial number.cfg format or use the name autodeploy.cfg.
To start USB-based automatic configuration for a device, you must connect the USB disk to the device
before powering on the device. If the USB disk has a configuration file named by the device's serial
number, the device copies the configuration file to its default storage medium and specifies it as the
next-startup configuration file.
If the automatic configuration fails, the device uses the next-startup configuration file on its default storage
medium. If the default storage medium does not have a next-startup configuration file, the device starts
up without loading a configuration file.
Examples
# Disable USB-based automatic configuration.
<Sysname> system-view
[Sysname] undo autodeploy udisk enable
205