Table of Contents
Advertisement
4.7.2 Replacing the gearbox, axes 2- 3
Location of gearbox, axes 2-3
The axis-2 and axis-3 gearboxes are located on either side of the frame as shown
in the figure.
xx1000001399
Required equipment
Equipment, etc.
Gearbox, axes 2-3
Sealing axes 2-3
Lock screw M16x55
Screw M12x50
Screw M12x100
Guide pins M12
3HAC039838-001 Revision: C
Art.no
For spare part no. see:
•
Spare parts on
page
3HAC022379-001
-
-
-
-
© Copyright 2013 ABB. All rights reserved.
4.7.2 Replacing the gearbox, axes 2- 3
Note
355.
Always replace.
Use to lock the lower arm.
2 pcs. Use to unload the balancing
device.
2 pcs, must have full thread. Use to
press the gearbox free from the
frame.
Use guide pins in pairs.
Continues on next page
4 Repair
311
Advertisement
Table of Contents
