Table of Contents
Advertisement
Press tool premounting bearing
The press tool used for premounting the bearing race, bearing complete, radial
seal with dustlip and ring in the tilthouse, consists of the parts shown in the figure.
xx1000001431
Note! Parts of the tool cannot be ordered separatly. All parts (except the hydraulic
cylinder) are inluded when ordering the complete tool.
A
B
C
D
E
F
3HAC039838-001 Revision: C
Threaded bar
Stop nut
Hydraulic cylinder (must be ordered separately)
Distance (and screws M6x14, 2 pcs)
Press housing (3HAC039277-004)
Press washer (3HAC039277-005)
© Copyright 2013 ABB. All rights reserved.
4 Repair
4.4.2 Replacing the tilthouse unit
Continues on next page
Continued
195
Advertisement
Table of Contents
