Table of Contents
Advertisement
4 Repair
4.5.1 Replacing the balancing device
Continued
2
3
4
5
Continues on next page
270
Action
Apply sealing compound on the surface for the
sealing ring.
Tip
Apply the sealing compund on the sealing rings.
Refit the inner sealing rings and support
washers in both ends.
Check that the bearings in the balancing device
are fitted correctly, that is in the center of the
hole. (The distance from the bearing to the edge
of the rod must be the same on both sides.)
CAUTION
The balancing device weighs 100 kg.
All lifting accessories used must be sized ac-
cordingly!
© Copyright 2013 ABB. All rights reserved.
Note
xx1000001270
xx1000001116
3HAC039838-001 Revision: C
Advertisement
Table of Contents
