Table of Contents
Advertisement
1.3.2 Safety symbols on manipulator labels
Introduction to labels
This section describes safety symbols used on labels (stickers) on the manipulator.
Symbols are used in combinations on the labels, describing each specific warning.
The descriptions in this section are generic, the labels can contain additional
information such as values.
Types of labels
Both the manipulator and the controller are marked with several safety and
information labels, containing important information about the product. The
information is useful for all personnel handling the manipulator system, for example
during installation, service, or operation.
The safety labels are language independent, they only use graphics. See
on safety labels on page
The information labels can contain information in text (English, German, and
French).
The labels are identified and located on the product as shown in the section:
Symbols on safety labels
Symbol
xx0900000812
xx0900000811
xx0900000839
3HAC039838-001 Revision: C
Note
The safety and health symbols on the labels on the manipulator must be observed.
Additional safety information given by the system builder or integrator must also
be observed.
•
on page ?
© Copyright 2013 ABB. All rights reserved.
1.3.2 Safety symbols on manipulator labels
39.
Description
Warning!
Warns that an accident may occur if the instructions are not
followed that can lead to serious injury, possibly fatal, and/or
great damage to the product. It applies to warnings that apply
to danger with, for example, contact with high voltage electrical
units, explosion or fire risk, risk of poisonous gases, risk of
crushing, impact, fall from height, etc.
Caution!
Warns that an accident may occur if the instructions are not
followed that can result in injury and/or damage to the product.
It also applies to warnings of risks that include burns, eye injury,
skin injury, hearing damage, crushing or slipping, tripping, im-
pact, fall from height, etc. Furthermore, it applies to warnings
that include function requirements when fitting and removing
equipment where there is a risk of damaging the product or
causing a breakdown.
Prohibition
Used in combinations with other symbols.
1 Safety
Symbols
Continues on next page
39
Advertisement
Table of Contents
