Table of Contents
Advertisement
2 Installation and commissioning
2.3.8 Fitting equipment on robot
Continued
Illustration, fitting on turning disk
The illustration below shows the mounting holes available for fitting equipment on
the turning disk.
xx1000001058
A
Fastener quality
When fitting tools on the turning disk (see the figures above), only use screws with
quality 12.9. When fitting other equipment to mounting holes standard screws with
quality 8.8 may be used.
86
Mounting flange
© Copyright 2013 ABB. All rights reserved.
3HAC039838-001 Revision: C
Advertisement
Table of Contents
