Table of Contents
Advertisement
xx0500002483
A
B
C
D
Required equipment
Equipment etc.
Lubricating oil
Standard toolkit
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below
Inspecting, oil level gearbox 2 - 3
Use this procedure to inspect the oil level in gearbox axes 2 - 3.
1
3HAC039838-001 Revision: C
Gearbox, axis 3
Oil plug, draining
Oil plug, filling
Ventilation hole, gearbox axis 3
Action
WARNING
Handling gearbox oil involves several safety risks.
Before proceeding, please read the safety inform-
ation in the section
WARNING - Safety risks during
work with gearbox lubricants (oil or grease) on
page
50.
© Copyright 2013 ABB. All rights reserved.
3.3.2 Inspecting, oil level gearbox axes 2 - 3
Art.no.
Note
See
Type and
amount of oil in
gearboxes on
Do not mix with other oils!
page
127.
-
Content is defined in section
Standard tools on page
These procedures include refer-
ences to the tools required.
Note
3 Maintenance
Continued
Note
351.
Continues on next page
107
Advertisement
Table of Contents
