Inspecting, Mechanical Stop Pin, Axis 1 - ABB IRB 760 Product Manual

3.3.7 Inspecting, mechanical stop pin, axis 1

Location of mechanical stop pin
The mechanical stop axis 1 is located at the base as shown in the figure.
xx0600002695
A
B
Required equipment
Equipment, etc.
Mechanical stop pin axis 1
Standard toolkit
3HAC039838-001 Revision: C
WARNING
Mechanical stop pin can not be mounted on robot if option 810-1 Electronic
Position Switch is used.
WARNING
Mechanical stop pin can not be mounted on robot if option 561-1 Extended work
range axis 1 is used.
Mechanical stop pin
Fixed stop
© Copyright 2013 ABB. All rights reserved.
3.3.7 Inspecting, mechanical stop pin, axis 1
Art. no. Note
See Spare parts on To be replaced when damaged.
page 355
- Content is defined in section
tools on page
3 Maintenance
Standard
351.
Continues on next page
119