Table of Contents
Advertisement
4
5
6
3HAC039838-001 Revision: C
Action
Remove the plastic screws in the upper end of
the balancing device.
Insert two screws, M12x50 in the holes to
neutralize the spring force. Screw in the screws
until they have proper contact with the cylinder
inside.
The length of the cylinder is now locked and
the balancing device is unloaded. It should now
be possible to easily rotate the balancing
device.
Attach a lifting accessories to the balancing
device.
Use the hole in the lifting ear.
© Copyright 2013 ABB. All rights reserved.
4.5.1 Replacing the balancing device
Note
xx1000001111
xx1000001112
Continues on next page
4 Repair
Continued
267
Advertisement
Table of Contents
