Table of Contents
Advertisement
4 Repair
4.6.2 Replacing motors, axes 2 and 3
Continued
11
12
13
14
Continues on next page
288
Action
Fit two guide pins in two of the motors attach-
ment holes.
If required, press the motor out of position by
fitting two screws in the remaining attachment
holes of the motor, diagonal to each other.
Remove the two screws and fit the lifting tool,
motor axes 2-3 to the motor.
CAUTION
The motor weighs 32 kg.
All lifting accessories used must be sized ac-
cordingly!
© Copyright 2013 ABB. All rights reserved.
Note
Art. no. is specified in
Required
equipment on page
284.
xx1000001131
M12x70, fully threaded.
Always use the removal screws and
tools in pairs!
xx1000001184
Art. no. is specified in
Required
equipment on page
284.
3HAC039838-001 Revision: C
Advertisement
Table of Contents
