Open Project; Configure Hardware; Figure 26: Plc Configuration - WAGO I/O System 750 Quickstart Reference

WAGO-I/O-SYSTEM 750
750-880 ETHERNET Programmable Fieldbus
4.1

Open project

1. Start WAGO-I/O-PRO:
Start > All Programs > WAGO-Software > CoDeSys > CoDeSys V2.3 >
CoDeSys V2.3.
2. In the WAGO-I/O-PRO software, select File > Open ... in the menu and
open the CoDeSys project "Starterkit880_App1_FUB.pro".
4.2

Configure hardware

1. Select PLC configuration in the tree structure in the Resources tab in order
to access hardware configuration.
2. Double-click "PLC configuration" to open the dialog box.
3. In this dialog, open the complete tree structure for the K-Bus
The 750-400 and 750-501 I/O modules will appear. The associated channels
are listed below the I/O module entries.

Figure 26: PLC configuration

1
*K-Bus = internal data bus
Quickstart Reference
Version 1.0.0
Application example: Starterkit880_App1_FUP.pro 31
1
entry.