Soft Counter - Canon Image Reader-A1 iR5000i Service Manual

CHAPTER 2 MAIN CONTROLLER

4. Soft Counter

The machine is equipped with a soft counter for counting the number of prints. The
counter reading is indicated in response to a press on the Check key on the control panel.
The counter is controlled by the main control PCB, and the count is incremented when
any of the following sensors detects paper during copying/printing operation.
Copying/printing operation
Single-sided
Double-sided
Finisher in use
The counter function is composed of a total of 8 modes, each for large size and small size
(a total of 16 mode types) as shown below:
Copying/printing operation
Local copying
PDL printing
BOX printing
Remote copying/printing
Fax reception printing*2
Report printing
Duplexing printing
Scanning
*1: At time of shipment, B4 or less; to include B4 in the large-size category, use service
mode.
*2: The machine is not provided with a fax function, not counting printing of messages re-
ceived by fax.
2-22 S
Internal delivery sensor (PS35)
Double-sided pre-registration sensor (PS30)
Delivery sensor
T02-400-01
T02-400-02
COPYRIGHT © 2001 CANON INC.
Sensor name
Large size
A
C
E
G
I
K
M
O
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
Small size*1
B
D
F
H
J
L
N
P