Mounting The Transfer/Separation Charging Assembly - Canon Image Reader-A1 iR5000i Service Manual

CHAPTER 4 IMAGE FORMATION SYSTEM

7.7.2 Mounting the Transfer/Separation Charging Assembly

Mount the transfer/separation charging assembly by reversing the steps used to remove it
while keeping the following in mind.
1) Make sure that the four protrusions [1]
on the transfer/separation charging as-
sembly are correctly fitted into the cut-
offs [2] in the fixing/feeding unit.
2) Make sure that the leaf spring [3] of the
fixing/feeding unit comes in contact
with the frame of the transfer/separation
charging assembly (slide from the
front).
3) Mount the fixing guide plate [4] with a
mounting screw [5].
4-64 P
COPYRIGHT © 2001 CANON INC.
[1]
[1]
F04-707-04
F04-707-05
[2]
F04-707-06
F04-707-07
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
[1]
[1]
[2]
[3]
[2]
[5]
[4]