Adjusting The Position Of The Delivery Flapper Solenoid (Sl5); Adjusting The Position Of The Right Deck Pickup Solenoid (Sl6) - Canon Image Reader-A1 iR5000i Service Manual

4.10 Adjusting the Position of the Delivery Flapper Solenoid
(SL5)
Adjust the position of the mounting screw [2] using the screw [2] so that the drive lever
[1] is pushed fully when the solenoid turns on (i.e., when the plunger is drawn).
4.11 Adjusting the Position of the Right Deck Pickup Solenoid
(SL6)
Adjust the position of the solenoid so that the left edge of the arm 2 is 57.2 ±0.5 mm from
the center of hole A of the solenoid mounting base.
COPYRIGHT © 2001 CANON INC.
CHAPTER 3 STANDARDS AND ADJUSTMENTS
[1]
F03-410-01
F03-411-01
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
[2]
[A]
±
57.2 0.5mm
3-17 T