CHAPTER 2 ORIGINAL EXPOSURE SYSTEM
6. Scanner Drive Block
6.1 Scanner Motor
6.1.1 Removing the Scanner Motor
1) Remove the reader rear cover.
2) Remove the reader controller.
(See F03-601-01)
3) Remove the screw [1], and detach the
ADF base (right) [2].
4) Remove the five screws [3], and detach
the motor cover [4].
5) Remove the two springs [5], and re-
move the three screws [6]; then, while
shifting the motor unit [7] in the direc-
tion of the arrow, detach the belt.
6) Remove the two screws [8], and detach
the scanner motor [10] from the motor
base [9].
2-18 R
COPYRIGHT © 2001 CANON INC.
[4]
[3]
F02-601-01
[6]
[7]
F02-601-02
[10]
[8]
F02-601-03
2000 2000 2000 2000
CANON iR5000i/iR6000i REV.0 JUNE 2001
[2]
[1]
[3]
[5]
[6]
[5]
[9]
Need help?
Do you have a question about the Image Reader-A1 iR5000i and is the answer not in the manual?